6 Installation
6 / 32
Min.30 cm
Mi
n.
50 c
m
Min.30 cm
Min.30 cm
Min.30 c m
Min.30 cm
Min.30 cm
Min.30 cm
Min.30 cm
Min.30 cm
Mi
n.
50 c
m
Mi
n.
50 c
m
Mi
n.
50 c
m
Mi
n.
50 c
m
Mi
n.
50 c
m
Mi
n.
50 c
m
Mi
n.
50 c
m
Mi
n.
50 c
m
Mi
n.
50 c
m
Mi
n.
50 c
m
FIG.6-4 Staggered Installation Mode (Recommended)
12) Install the inverter vertically or at a maximum backward tilted angle of 15 degrees to facilitate heat dissipation,
and to ensure that no moisture can penetrate the product.
≤15°
FIG.6-5 Installation Angle Requirements
13) Do not install the inverter outdoors in salt, sulfur or other corrosive areas.
The inverter would be corroded in salt (i.e. marine environments) area, and the corrosion may cause fire. In salt area
refers to the region within 500 meters from the coast.
Please consult the CSI Solar Co., Ltd. Technical support department on the use of inverters in special climates (i.e. salt,
sulfur, or ammonia areas) which may affect the product warranty.
6.2 Mounting Wall-mounting Bracket
Danger
To avoid electrical shock or other injury, please inspect existing electronic or plumbing installations
before drilling holes.
Installation steps:
1) Use the wall-mounting bracket as a template and mark the positions of the drill holes, then drill the 4 holes
accordingly, as per FIG. 6-6. (Diameter = 11 mm, Depth ≥ 55 mm).
Note: The external dimensions (W x H, 355 x 435 mm) of inverter are shown as a dashed line in FIG. 6-6.
