9 Commissioning Inverter
17 / 32
9.4.4 Parameters setting
Set parameters locally according to the local requirements.
Go to “Parameter Settings”.
1) Select country, shown as per FIG. 9.6.
Note: The default country code is Australia A.
Inverter provides preset protection parameters for each country code.
FIG. 9-6 Select Country
2) Set Power Quality Response Modes
a) Power derating for voltage variation (Volt-Watt mode), as per FIG. 9.7
FIG. 9-7 Power Derating for Voltage Variation (Volt-Watt mode)
