6.7.12 Debug Parameter
6. Normal operation
6. Normal operation
6.7.13 FAN Test
This section is applicable to maintenance personnel only.
Figure 6.23
Debug
Parameter as shown as below:
This section is applicable to maintenance personnel only.
Press the UP/DOWN keys to scroll through items. Press the ENTER key to select
.
Press the DOWN key to scroll and press the UP key to change the value.
Press the ENTER key to save the setting. Press the ESC key to cancel
.
changes and return to the previous menu.
→
S16DAT1: +0000
S16DAT2: +0000
S16DAT3: +0000
S16DAT4: +0000
S16DAT5: +0000
S16DAT6: +0000
S16DAT7: +0000
S16DAT8: +0000
.49.
.48.
Figure 6.24
Selecting “Fan Test” displays the sub-menu shown below:
Are
you
sure
?
YES
=<
ENT
>
NO
=<
ESC
>
Fan Test is a factory test function.
Press the ENTER key to start the test.
Press the ESC key to return to the previous menu.
6.7.10 HMI Update
HMI
Current
Ver
.: 02
YES
=<
ENT
>
NO
=<
ESC
>
Selecting “Updater” displays the sub-menu shown below:
This section is applicable to maintenance personnel only.
Updater is for updating LCD firmware.
Press the ENTER key to start the process.
Press the ESC key to return to the previous menu.
Figure 6.22
6.7.11 Restart HMI
The
function
is
used
for
restart
the
HMI
.
This function is applicable by maintenance personnel only, wrong operation
will prevent the inverter from reaching maximum power.
Summary of Contents for CSI-125K-T600GL02-E
Page 36: ......
