Harvia M3 Wood Stove Installation (Chimney out the top) (Optional)
Install the 2 halves of the thin metal sheeting around
the chimney on the inside to cover the hole.
Below the bench support on the back wall, mark the
vent hole position.
tel: 888-923-9813 | [email protected]| web: www.leisurecraft.com
Manufactured by:
Drill out with a 2” (51mm) hole saw.
Only go half way through to prevent splintering and
drill the remainder from the other side of wall.
Using 1 ½” (38mm) screws, screw on the vent cover.
(note that the vent guard only goes on the outside.)
25
Harmony Barrel Sauna
Assembly Instructions