Canada Docks Do-It-Yourself Small Floating Hexagon, Assembly Instructions Manual, Page: 6 / 11

SMALL FLOATING HEXAGON INSTRUCTIONS
Canada Docks
.
ca
TM
Manufactured by: CanadaDocks Inc. 3690 Adjala-Tecumseth Townline RR2 Beeton, ON, Canada L0G 1A0 | 1-877-434-0359 | www.canadadocks.ca
Using locking pliers to hold in place, line up Joists
with the markings at the center. Attach Joists (R)
using #12x¾” Self Drilling Tek Screws (A) and #3
Phillips Bit (U).
Using locking pliers to hold in place, line up Joists
with the markings at the center. Attach Joists (R)
using #12x¾” Self Drilling Tek Screws (A) and #3
Phillips Bit (U).
Using locking pliers to hold in place, line up Joists
with the markings at the center. Attach Joists (P)
using #12x¾” Self Drilling Tek Screws (A) and #3
Phillips Bit (U).
19”
19”
Using the string, measure 19” from the edge of Truss
and mark on the length of Joists with permanent
marker. Repeat on Truss on the opposite side of
hexagon. Position and centre joist (R) under these
markings.
Using the string, measure 19” from the edge of Truss
and mark on the length of Joists with permanent
marker. Repeat this step on the opposite side of
hexagon. Position and centre joists (R) under these
markings.
16 15
14
13
Measure 2” from the string to the truss and mark
with permanent marker. Position and centre joist (P)
17
2”
2”
19”
12
19”
19”