SMALL FLOATING HEXAGON INSTRUCTIONS
Canada
Docks
.
ca
TM
Manufactured by: CanadaDocks Inc. 3690 Adjala-Tecumseth Townline RR2 Beeton, ON, Canada L0G 1A0 | 1-877-434-0359 | www.canadadocks.ca
1
2
3
4
Ensure you have all needed components before
beginning the build. Please see Page 1 for full
parts list.
Attach Trusses (O) using Hexagon Corner Bracket (I), Carriage Bolts (D) and Kep-Locknuts (E) to create the
outer frame of the hexagon. Ensure that top of trusses are facing upwards for step 4.
Ensure that top of trusses are
facing upwards.
Top of Trusses
5
Truss Centre Point
Truss Centre Point
Measure the centre point of the truss (as shown)
for opposite sides the truss frame. Mark the centre
of each side with permanent marker. Position and
centre joist (Q) under your markings.
Using locking pliers to hold in place, line up Joists
with the markings at the center. Attach Joists (Q)
using #12x¾” Self Drilling Tek Screws (A) and Phillips
#3 Bit (U).
Truss Centre Point
E
E
E
D
D