47
ENGLISH
Installation, use and maintenance instruction manual
▪
Ed. 01/2021 Rev. 01
POSITIONING THE APPLIANCE
Proceed as follows to position the appliance on the support structure:
step
action
1
Place the gasket on the edges of the moulding (if provided for this model).
2
Position the appliance on the recessed hole: verify its centre and push it onto the support structure.
3
Fix the appliance using the self-tapping screws from the supplied fixing kit, taking care to insert them into
the special fixing holes at the 4 corners of the product (with a screwdriver - maximum tightening torque of
1.2 Nm).
CAUTION!
There must be an opening below the hob of at least 50 x 50 mm for the passage of the gas
and electrical connections.
Before performing this type of installation, please have all the necessary tools and the appropriate PPE
ready.
EQUIPMENT REQUIRED
4 x
4 x
2
1
3
Use the fixing screws included
with the KIT supplied with the
product.
Summary of Contents for FC1346 Series
Page 152: ......
