PARTS TO BE INSTALLED
rbl2010-002-021_a
TYPICAL
NOTICE
Always move vehicle rearward out of
the crate base.
PARTS TO BE INSTALLED
Front Cargo Module
Installation
WARNING
Make sure battery is not connected before
installing front cargo module. Do not install
front cargo module if battery is connected
because sparks can occur if tools touch bat-
tery terminals.
1. Remove antenna from front cargo module sub-
crate.
rbl2014-004-003_a
ANTENNA REMOVAL
1. Antenna
2. Front cargo module sub-crate
3. Locking ties to cut
2. Assisted by another person, remove and dis-
card bolts holding the bottom and the top sec-
tions of sub-crate.
rbl2014-004-007_a
TYPICAL
1. Lower retaining bolt
2. Upper retaining bolts
NOTE:
Be careful not to lose the caged nuts lo-
cated in the bottom fixation holes of the front
cargo module.
3. Open front storage compartment cover.
4. Ensure the following cables and connectors are
accessible prior to installing front cargo module,
cut locking ties if required.
rbl2014-004-014_a
REFER TO THE FOLLOWING TABLE FOR ITEMS DESCRIPTION
ITEMS
DESCRIPTION
1
PTS connector
2
RH and LH light connectors
- Fog lights (RT-S, RT
Limited and option package)
- Low beam headlights (CE models)
3
DLC connector (B.U.D.S.)
4
Storage cover actuator connector
(as applicable)
5
Storage cover switch connector
(as applicable)
14 / 52
2014-1
PREDELIVERY
