Can-Am SPYDER RT 2022, Operator'S Manual

Page: 129 / 204

127
N NO OT TE E::
For Limited models, the compressor
levels the vehicle automatically.
3. Position vehicle in front of a test
surface as shown. Make sure ve-
hicle is on leveled ground.
A
90°
1. 10 m (33 ft)
90°
Trace 2 lines parallel to the ground
on the test surface as follows:
L Liin ne ess o on n tth he e T Te esstt S Su urrffa acce e
Line A
770 mm
(30-5/16 in)
above ground
Line B
718 mm
(28-9/32 in)
above ground
4. Select llo ow w beam.
N NO OT TIIC CE E
M Ma akke e ssu urre e tth he e llo oa ad diin ng g cco on nd diittiio on nss
a arre e rre ep prre esse en ntta attiivve ess o off tth he e rriid diin ng g
cco on nd diittiio on nss w wh he en n a ad djju ussttiin ng g tth he e
h he ea ad dlliig gh httss..
5. Beam aiming is correct when the
top line of the headlight reflection
is between lines A and B.
H He ea ad dlliig gh httss V Ve errttiicca all A Aiim miin ng g
A Ad djju ussttm me en ntt
When adjusting the headlight, low and
high
beam are adjusted
simultaneously.
1. Remove the mirror trim.
2. On Australian models:
1. Unplug the flasher connector.
2. Remove the screw on the end
of the mirror housing.
3. Slightly, pull the mirror to make
more room.
3. Using the Phillips screwdriver pro-
vides in the tool kit, turn the head-
light
adjuster to adjust the
headlights vertically.
MAINTENANCE PROCEDURES