Can-Am SPYDER RS Operator'S Manual Download Page 74 | Manualshive

Page: 74 / 147

Can-Am SPYDER RS Operator'S Manual Download Page 74

SAFETY INFORMATION ON THE VEHICLE

This vehicle comes with a hang tag and
labels containing important safety in-
formation.

Any person who rides this vehicle
should read and understand this in-
formation on the vehicle before riding.

Hang Tag

704901792

704901792

Safety Card

The Safety Card is found at the top of
the multifunction gauge cluster. Pull it
out to read it, and be sure to securely
put it back before riding.

Use the Safety Card to review key in-
formation and when you are teaching
new operators and passengers how
to ride the vehicle. It also includes fre-
quently referenced information, such
as tire pressure, weight limits and a
pre-ride inspection checklist.

NOTE:

The following illustration used

in this Operator's Guide is a general
representation only. Your model may
differ.

72

_____

SAFE OPERATING INSTRUCTIONS

______

«
...
72
73
74
75
76
...
»

Summary of Contents for SPYDER RS




















































































































































Reviews:

No comments