Can-Am SPYDER RS, Operator'S Manual, Page: 112 / 147

PROBLEMS
Light Failure
If any light stop working on the vehicle,
replace bulb of defective light.
If the light failure still occurs, have
the vehicle serviced by an authorized
Can-Am roadster dealer.
CAUTION Always turn the ig-
nition switch to the OFF position be-
fore replacing a bulb to avoid electric
shock.
Always check light operation after re-
placement.
rmo2008-001-084_a
LIGHTS LOCATION — FRONT OF VEHICLE
1. Turn signal light
2. Headlight
3. Position light
rmo2008-001-088_a
LIGHTS LOCATION — REAR OF VEHICLE
1. Tail light/brake light
2. Turn signal light
3. License plate light
Headlight
1. Insert a small flat head screwdriver
in one of the two holes on the upper
console.
2. Press on the screwdriver and gently
pry out the upper corner of the clus-
ter.
3. Insert a finger to maintain the open-
ing of the upper corner.
rmo2008-001-121_a
1. Upper console
2. Press on the screwdriver inside hole
3. Insert finger in opening
4. With the other hand, insert the
screwdriver in the other hole on the
upper console.
110
______________