Can-Am Outlander X mr Series Operator'S Manual Download Page 96

Page: 96 / 196

MULTIFUNCTION GAUGE (LCD) (650 AND 850 MODELS)

vmo2012-012-029_m

1. Display 2 (mode)
2. Display 3 (mode/message)

Odometer

Records the total distance travelled.

Clock

Shows current time.

Trip Meter

Records the distance travelled since it
has been reset.

Press and HOLD display selection but-
ton to reset.

Hour Meter (Trip Time)

Records the vehicle running time
when the electrical system is activated
since it has been reset.

Press and HOLD display selection but-
ton to reset.

Engine Hour Meter

Records engine running time.

Engine RPM

Measures

engine

revolutions

per

minute (RPM).

Multifunction Gauge
Set-Up

WARNING

Never adjust or set functions on
the multifunction gauge while rid-
ing the vehicle.

Unit Selection (MPH vs KM/H)

This multifunction gauge is factory pre-
set in Imperial units but it is possible
to change it to Metric units, contact an
authorized Can-Am dealer for unit set-
tings.

NOTE:

All features will have their units

changed all together.

Language Selection

The gauge display language can be
changed.

Refer to an authorized

Can-Am dealer for language availability
and setup the gauge to your prefer-
ence.

Clock Setting

To set current time, proceed as fol-
lows:

1. Select the clock display.

vmo2012-012-029_o

1. Time (Display 2)
2. Message (Display 3)

2. Press and HOLD button (SET TIME

will appear on display 3).

3. Choose

the

12-hour

(12H)

24-hour (24H) format by pressing
button.

4. If the 12-hour format was selected,

choose Am ("A") or Pm ("P") by press-
ing button.

5. Choose hour first digit by pressing

button.

6. Choose hour second digit by press-

ing button.

______________

Summary of Contents for Outlander X mr Series





































































































































































































Search results

Summary of Contents for Outlander X mr Series

Reviews:

Related manuals for Outlander X mr Series

Brands by name

Popular brands

Can-Am Outlander X mr Series, Operator'S Manual

Search results

Summary of Contents for Outlander X mr Series

Reviews:

Related manuals for Outlander X mr Series

Brands by name

Popular brands