Can-Am outlander 400 Operator'S Manual Download Page 71 | Manualshive

Page: 71 / 152

background image

To change the transmission position,
completely stop vehicle then move
lever to the desired position. Do not
force lever. If unable to shift, rock
the vehicle back and forth to move
the gears in the transmission and try
again.

V07D07Y

SHIFT PATTERN

CAUTION: Always completely stop
the vehicle and apply the brake
prior to moving the transmission
lever.

P: Park

This position locks the transmission to
help prevent vehicle movement. Al-
ways use when the vehicle is not in
operation. In some circumstances, it
may be necessary to rock the vehicle
back and forth to move the gears in
the transmission to allow the park to
be engaged.

R: Reverse

This allows the vehicle to go back-
ward. The vehicle speed is limited.



WARNING

Before moving vehicle in reverse,
ensure the path behind is clear of
obstacles or bystanders. Remain
seated.

N: Neutral

This position disengages the transmis-
sion to allow manual vehicle move-
ment.

H: High gear

This selects the high speed range of
the transmission in the gear box. It is
the normal driving speed range. It al-
lows the vehicle to reach its maximum
speed.

L: Low gear

This selects the low speed range of
the transmission in the gear box. It
is the working position. It allows the
vehicle to move slowly with the maxi-
mum traction and power.

NOTE:

Use the low speed range to

pull any load or to climb a steep incline.

6) Multi-Switch Housing

The controls located on this multi-
switch housing are:

vmo2006-016-001_a

TYPICAL — MULTI-SWITCH HOUSING

1. Headlamp switch
2. Engine stop switch
3. Engine start button
4. Override button

_____________________

69

«
...
69
70
71
72
73
...
»

Summary of Contents for outlander 400

























































































































































Reviews:

No comments

Related manuals for outlander 400

1993 TRX300FW Fourtrax 300 4x4

Brand: Honda Pages: 157

Brand: Yamaha Pages: 46

Brand: Yamaha Pages: 155

Brand: Yamaha Pages: 190

Brand: Snapper Pages: 6

Brand: Snapper Pages: 8

Brand: Snapper Pages: 36

Giga-Trailer 1840

Brand: Strautmann Pages: 39

ski-doo REV GEN4 TOURING ACE

Brand: BRP Pages: 340

Brand: Logan Pages: 28

Dodge Grand Caravan

Brand: Savaria Pages: 44

Brand: E-Z-GO Pages: 180

Brand: KAYO MOTOR Pages: 99

Brand: Ifor Williams Trailers Pages: 55

Brand: Daymak Pages: 28

Brand: Taylor-Dunn Pages: 204

Brand: Baja Pages: 57

Raider Pro 250 S

Brand: Dazon Pages: 31

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands