Can-Am outlander 400 Operator'S Manual Download Page 52 | Manualshive

Page: 52 / 152

background image

Uphill

Keep your body weight forward towards the top of the hill. Keep your feet on
the footpegs and shift into low gear then accelerate and when necessary, change
gear quickly as you climb. Do not over-speed since this may cause the front of
the vehicle to lift from the ground and fall back on you. If the hill is too steep and
you cannot proceed or the vehicle begins to roll backwards, apply the brake, being
careful not to slide. Dismount then use the "U" turn or "K" turn (while walking
back, next to the vehicle on the up hill side and with a hand on the brake lever,
slowly back the rear of the vehicle toward the top of the hill then drive downhill).
Always walk or dismount on the upside of the slope while keeping clear of the
vehicle and its rotating wheels. Do not try to hold on to the vehicle if it begins to
topple. Stay clear. Do not ride over the crest of the hill at high speed. Obstacles,
including sharp drop-offs, may exist.

V00A0XL

50

___________

SAFETY INFORMATION

___________

«
...
50
51
52
53
54
...
»

Summary of Contents for outlander 400

























































































































































Reviews:

No comments

Related manuals for outlander 400

Brand: Baja motorsports Pages: 77

Brand: E-Z-GO Pages: 66

Brand: BOMBARDIER Pages: 99

TRX500FA Fourtrax Foreman Rubicon

Brand: Honda Pages: 242

Brand: TrailMaster Pages: 8

Brand: TrailMaster Pages: 40

Brand: TrailMax Pages: 62

Brand: Whirlwind Pages: 7

Brand: Yamaha Pages: 26

Raptor YFM660RS

Brand: Yamaha Pages: 50

Brand: Yamaha Pages: 133

Brand: Yamaha Pages: 144

RAPTOR YFM660RP

Brand: Yamaha Pages: 180

Phazer PZ50GTX 2008

Brand: Yamaha Pages: 212

Brand: TSE Pages: 472

Brand: Kinroad Pages: 80

Brand: X-TREME Pages: 11

Brand: Let's Go Aero Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands