Can-Am DS 70, Operator'S Manual, Page: 100 / 132

MAINTENANCE PROCEDURES
Turn steering in the straight-ahead po-
sition to ensure reservoirs are levelled.
Check fluid level, the reservoir is full
when the fluid reaches of the top of
window.
vmr2008-101-003_a
TYPICAL
1. Minimum
2. Maximum
Visually inspect lever boot condition.
Check for cracks, tears, etc. Replace if
damaged.
Repeat the same procedure for the
other reservoir.
Brakes Inspection (hydraulic)
DS 90 X Only
WARNING
The brake fluid replacement or
brake system maintenance and
repairs should be performed by an
authorized Can-Am dealer.
The braking system is an hydraulic type
and no adjustment is required.
Check the following to keep the brakes
in a good operating condition:
– Brake fluid level
– Brake system for fluid leaks
– Brake for spongy feel
– Brake cleanliness
– Brake discs for excessive wear and
surface condition
– Brake pads for wear, damage or
looseness.
Have your authorized Can-Am dealer
inspect brake pads for wear or dam-
age.
BRAKE PAD
MINIMUM
THICKNESS
1 mm (.0394 in)
See your authorized Can-Am dealer if
a problem is detected concerning the
brake system.
Frame
Fasteners Inspection
Check fastener condition and tight-
ness on the vehicle. Retighten as re-
quired.
Seat Latch Inspection
Remove seat and check latch mech-
anism for wear. See an authorized
Can-Am dealer for parts replacement if
damaged.
98
______________________