CAMTREE SUN 6 FRESNEL LIGHT— 2pcs.
2
CAMTREE SUN 6 SET UP USING THE FOLLOWING DESCRIPTIONS
AND PICTURES AS A GUIDE
Remove the collapsed stand from the carry bag, open the
spreaders and lock the spreader legs in position with the built in
control knob. The base extension of the spreader can be adjust-
ed to accommodate a number of different positions by sliding
the spreader legs up or down the riser stalk and then locking it
with the control knob.
The riser stands can be adjusted to a maximum height of 8’8”.
In preparation for mounting the head unit, it is advisable to lock
off the bottom riser at its lowest point of travel, extend the up-
per riser a foot and lock it off as well. This configuration allows
the head unit to be easily placed on the top riser.
INTRODUCTION
For the cinematographer in all of us, the ability to control and position light sources adds depth
and dimension to that creative process. Lighting design goes a long way in telling the story of the
image captured. The need for modern, technically advanced lighting gear to match the sophisti-
cation of today cameras is a challenge we continue to meet and exceed. Our
CAMTREE SUN 6
FRESENEL LIGHT
is but one example.
WHAT’S IN THE BOX
Please inspect the contents of your shipped package to ensure you
have received all that is pictured and listed below. The gray foam
shipping /storage container has been especially designed to protect
your purchase while in transit and is a good place to keep your
CAMTREE Sun 6 Fresnel Light
when not in use.
2x Camtree Sun 6 Fresnel lights
2x Gel Filter Album
2x 24V AC Adaptor
6x Adaptor
2x Light Stand
This assembly manual
IT IS IMPORTANT THAT YOU READ AND UNDERSTAND THIS GUIDE BEFORE ATTEMPTING TO
ASSEMBLE OR USE YOUR NEW CAMTREE SUN 6 FRESNEL LIGHT. SHOULD YOU NEED ADDITION-
AL INFORMATION, TECHNICAL ASSISTANCE IS AVAILABLE 'ON LINE' BY CONTACTING YOUR
SALES REPRESENTATIVE.
CONTENTS OF SHIPPING BOX
