Camtec Power Supplies GmbH – Gewerbestraße 30 – D-76327 Pfinztal – Germany
p.2/3 06.13C
Phone 0049(721)46596-0 - Fax 0049(721)46596-77 –
www.camtec-gmbh.com
-
(Subject to alterations. This product is not designed to be used in applications such as life support systems wherein a failure or malfunction could result in injury or death)
AC Input
90..132Vac / 184..265Vac , 47…63Hz , 250…375Vdc
AC Input Rating
115Vac <16.8A 230Vac <9A
Rated DC Voltage
72V
110V
150V
220V
300V*
Rated DC Current
13.9A (1000W)
9.1A (1000W)
6.7A (1000W)
4.55A (1000W)
3.33A (1000W)
Ripple [mVpp] 230Vac
200 (20MHz)
250 (20MHz)
250 (20MHz)
300 (20MHz)
400 (20MHz)
Output adj. range
58...86V
86...132V
132...180V
180...240V
264...360V
Order code: HPV10001.Vout+(T= DIN Rail ; W= wall mount) Example: 150V for DIN-Rail = HPV10001.150T
*upon request
Tolerance calibration
± 1%
Response on load switch
< ± 0.1% 10-100%, 100-10%
Stability on load switch
<1ms 10-100%, 100-10%
Basic load
None required
Efficiency typ.
92%
Load protection
1,05x I
rated
,auto recovery
Voltage protection
140% of U
out
, auto recovery
Short circuit protection
Continuous
Temperature control
Yes
Hold up time (230Vac)
> 30ms
Circuit breaker recommended
C16A
Inrush current (230Vac)
< 84A
Connections:
1 = N
SK1
2 = L
3 = GND
1 = DC +
2 = DC +
SK2
3 = DC -
4 = DC -
B Single/Parallel-
operation
Accessory:
Plug spring-type terminal
for Power Good Relay
Art.Nr.: 3520037
(2 pins) (each
package = 10 pcs)
Soft start
100ms typical
Cooling
Controlled Fan (EBM-Papst)
Operating temperature
- 20°C…+70°C
Storage temperature
- 40°C…+85°C
EMI
EN55022 class B
EMS
EN61000-6-2,3
Saftey
cUL60950, EN60950-1
Safety class 1(A)
VDE0805, VDE0100
Creepage distances
> 8mm
Input-/output isolation
AC-Input/DC-Output : 3KV, Input/GND 2KV,
Output/GND 500Vdc
Power Good Relais
Not available
MTBF IEC61709
400000h
MTTF IEC60050
127.196h (40°C/230Vac/75%)
Relative air humidity
95% not condensing @ 25°C
Climatic class
3K3
Safety class
II A (pollution degree)
Nominal altitude (max.)
3000m over sea level
Dimensions (HxWxD)
156x200x118.5mm
Weight
3300g
Spring types terminals in/out
AWG20...AWG6 / 0,5...12mm²
Camtec-Concept:
The Camtec power supply models provide high power density in a small housing. Camtec consequently follows the highest product
quality. We only use brand parts of the leading manufacturers on the highest level available. The advanced thermical design affords
and the use of 125°C High-End Elkos at recommended places offers the synergetic effect of novel product life time. The HPV power
supply series is being manufactured in our on FAB in Germany.
Parallel and Serial Operation:
Camtec power supplies of the same model & the same output voltage can operate in parallel or serial mode. Generally the use of
external electrical parts is not recommended. Make sure that the output voltage of all the involved units is accurately adjusted with a
tolerance of at least ±1%. Apply equal wiring lengths to connect the load. We recommend to use a neutral point wire network or to use
power bars. In serial mode please observe national safety norms for dangerous voltage. The switcher B selects between the single
and the parallel operation setup. Set to parallel mode the VI-chart of the power supply will be smoothly bent. In result the PWM-circuit
switches somewhat more softly. The power distribution between the involved power supply units is being more accurate. The team-
play is being more harmonious. The HPV04801-Serie is prepared to operate up to 300Vdc with floating outputs.
