CPS-EC480(R2) MANUAL
Camtec Power Supplies GmbH - Gewerbestrasse 30 - 76327 Pfinztal - Germany
P.11/12 (02/2017-01-3)
Phone +49(721)46596-0 - Fax +49(721)46596-77 -
www.camtec-gmbh.com
-
(Subject to alterations. This product is not designed to be used in applications such as life support systems wherein a failure or malfunction could result in injury or death)
Connections
Clamping Yoke Connector Specifications
Input / Output connections
Signal connections plugs
Tightening torque min. – max.
1,2 – 2,2Nm (blade 1,0x5,5 DIN5264 )
0,2 – 0,25Nm (blade 0,4x2,2 DIN5264)
Touch-safe protection acc. to DIN VDE 0470
IP20 plugged/ IP10 unplugged
Not applicable
Clamping range, min. – max.
0,5 – 16mm² / AWG26 – AWG6
0,2 – 1,5mm² / AWG28 – AWG14
Solid, H05(07) V-U min. – max.
0,5 – 16mm²
0,2 – 1,5mm²
Stranded, H05(07) V-U min. – max.
6 – 16mm²
0,2 – 1,5mm²
Flexible, H05(07) V-U min. – max.
0,5 – 16mm²
0,2 – 1,5mm²
w. plastic collar ferrule, DIN 46228 pt 4 min. – max.
2,5 – 10mm²
0,2 – 1,5mm²
w. wire end ferrule, DIN 46228 pt 1, min. – max.
2,5 – 10mm²
0,2 – 1,5mm²
Plug gauge in accordance with EN 60999 a x b; ø
5,4 x 5,1mm; 5,3mm
2,4 x 1,5mm; 2,3mm
Pitch (P)
10,16mm
3,5mm
Wire Stripping Length (fine wired)
Nominal Cross Section
Wire End Ferrule
Stripping Length
Wire End Ferrule
Stripping Length
0,25mm²
H0,25/5
5mm
H0,25/10 HBL
8mm
0,5mm²
H0,5/6
6mm
H0,5/12 OR
8mm
1,0mm²
H1,0/6
6mm
H1,0/12 GE
8mm
2,5mm²
H2,5/12
12mm
H2,5/19D BL
14mm
4,0mm²
H4,0/12
12mm
H4,0/20 GDR
14mm
6,0mm²
H6,0/20
12mm
H6,0/20 SW
14mm
10,0mm²
H10,0/12
12mm
H10,0/22 EB
15mm
The length of ferrules is to be chosen depending on the rated voltage. The outside diameter of the plastic collar should not be larger than
the pitch (P)
Ordering Information
Ordering Codes
Product Code
Information
Article Number
CPS-EC480.024(R2)
24V
3041104001CA
CPS-EC480.036(R2)
36V
3041104002CA
CPS-EC480.048(R2)
48V
3041104003CA
CPS-EC480.060(R2)
60V
3041104004CA
CPS-EC480.072(R2)
72V
3041104005CA
CPS-EC480.110(R2)
110V
3041104006CA
CPS-EC480.150(R2)
150V
3041104007CA
CPS-EC480.220(R2)
220V
3041104008CA
CPS-EC480.300(R2)
300V
3041104009CA
Back Plate Kit
Base Plate / Hart mount plate kit including screws
2201002001CA
