7
Channel Setting
Table a) Channel settings
ON
1 2
3
1
ON
1 2
3
2
ON
1 2
3
3
ON
1 2
3
4
ON
1 2
3
5
ON
1 2
3
6
ON
1 2
3
7
Assembly
1 . Screw the bracket (triangle) to the base of unit
2 . Attach the unit using the bracket to a stable mast .
3 . Set the transmitter antenna directly at the receiving point .
(Note: the transmitter antenna needs to „see” optically with
receiver antenna - view from the antennas on the last page
of this manual) .
4 . Install the receiver and manage precisely the antenna
directly on the point of broadcasting .
5 . Connect video signal cables and power supply as described
on the electronics board .
6 . Set the desired operating channel according to the table
above . Channel numbers and antennas polarization
should be the same for both interacting with each other
transceiver devices . The transmitter assembly with
potentiometer VR enables to set the video level.
WARNING! This adjustment is necessary because of the
different levels of video cameras of different brands. The
regulation is also necessary when using passive converters
BNC / UTP.
The video signal should be connected to the In / Out BNC or
UTP connectors .
Summary of Contents for TCO-7h Plus
Page 2: ......
