background image

9

General terms and conditions of a warranty 

Camsat company gives a warranty of 24 months for 

transmission sets of the following series TCO-7H Plus .

1 .  In case of detecting incorrect work of a device, before 

giving the device to the service, it is necessary to make 

sure that everything was done in accordance with the 

instruction manual . 

2 .  In case of giving or sending the faulty device to be 

repaired, it is indispensable to enclose a detailed 

description in the written form including faulty action of 

the device with taking into consideration work environment 

and the way in which they can be seen . 

3 .  One can use the warranty if he shows the proof of purchase 

(a receipt) with the claimed device including the purchase 

date and a description of the damage . 

4 .  The warranty repair includes only damages resulting from 

causes included in the sold device .

5 .  The warranty repair will be made in the shortest time 

possible not exceeding 14 days counting from the date 

of accepting the device to be repaired in the service . In 

case of a necessity to import parts, the repair date can be 

exceeded . After making the repair, the warranty period is 

exceeded by the time of repair . 

6.  The guarantor is not responsible for losing configuration 

settings of the device resulting from the repair of the 

device or its damage . 

7 .  The guarantor can refuse making the warranty repair or 

completely renounce from the warranty in case of stating 

that seals on the devices or subsystems included in it 

are broken .

8 .  All remarks concerning the service and resulting 

from the warranty are made only in the service of the 

Camsat company .

Summary of Contents for TCO-7h Plus













Reviews: