6.3. Testing the configuration
After completing the basic configuration, the device will connect to the internet.
In the Status > Network > WAN menu you can see the public IP address of our module.
If this address matches the IP address on the contract with the operator, you can check
the connection by running the ping command
(e.g.
W R > cmd > ping 100.100.100.100 -t
)
If the module responds to queries, we can proceed to the next step.
WARNING
If the APN access point name is incorrect, we will use the private IP address
instead of the public one. Internet access still exists, but with an undesirable IP
address.
If the IP address is different or no connection is established, check the configuration
settings in the Network >> Modem menu. Entering an incorrect APN name will assign a
different IP address. You can check the correct APN on the network operator's page.
Page 24
