ENGLISH
3
SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different, if the device is used for commercial purpose.
1.Before using the product please read carefully and always comply with the following
instructions. The manufacturer is not responsible for any damages due to any misuse.
2.The product is only to be used indoors. Do not use the product for any purpose that is not
compatible with its application.
3.The applicable voltage is 230V, ~50Hz. For safety reasons it is not appropriate to
connect multiple devices to one power outlet.
4.Please be cautious when using around children. Do not let the children to play with the
product. Do not let children or people who do not know the device to use it without
supervision.
5.WARNING: This device may be used by children over 8 years of age and persons with
reduced physical, sensory or mental capabilities, or persons without experience or
knowledge of the device, only under the supervision of a person responsible for their
safety, or if they were instructed on the safe use of the device and are aware of the
dangers associated with its operation. Children should not play with the device. Cleaning
and maintenance of the device should not be carried out by children, unless they are over
8 years of age and these activities are carried out under supervision.
6.After you are finished using the product always remember to gently remove the plug from
the power outlet holding the outlet with your hand. Never pull the power cable!!!
7.Never put the power cable, the plug or the whole device into the water. Never expose the
product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the
product in humid conditions.
8.Periodically check the power cable condition. If the power cable is damaged the product
should be turned to a professional service location to be replaced in order to avoid
hazardous situations.
9.Never use the product with a damaged power cable or if it was dropped or damaged in
any other way or if it does not work properly. Do not try to repair the defected product
yourself because it can lead to electric shock. Always turn the damaged device to a
professional service location in order to repair it. All the repairs can be done only by
authorized service professionals. The repair that was done incorrectly can cause
hazardous situations for the user.
10.Never put the product on or close to the hot or warm surfaces or the kitchen appliances
like the electric oven or gas burner.
11.Never use the product close to combustibles.
12.Do not let cord hang over edge of counter or touch hot surfaces.
13.Never leave the product connected to the power source without supervision. Even when
use is interrupted for a short time, turn it off from the network, unplug the power.
14.In order to provide additional protection, it is recommended to install residue current
device (RCD) in the power circuit, with residual current rating not more than 30 mA.
Contact professional electrician in this matter.
1
5
.Do not expose the meat grinder and its accessories to high temperatures (above 60°C)
16
.Change the accessories only when the device is switched off.
17
.The grinding assembly needs to be carefully assembled. Inaccurate assembly can
cause poor grinding performance and knife and hole plate blunting.
18
.Use only original accessories supplied with the grinder.
19
.Do not overload the device with excess product or shoving the product in too hard. Use
only the pusher for shoving the product in. Using other object can damage the grinder.
20
.The meat to be ground should be free of bones, gristles, tendons or veins. Cut the
