background image

EN - 21

5.  Delayed Start

Delay 

Timer

•  Press the Delay button once. 
•   “1 h” will appear on the display. 
•  The   symbol will flash on the 

electronic display. 

•  Press the Delay button until the desired 

delayed time appears on the display. 

•   If you have skipped the delay time you 

wanted to set, keep pressing the Delay 

button until the desired delay time is 

displayed again.

•  For the delay timer function to work, you 

must press Start/Pause button.

•  To activate the time delay, press “Start/

Pause” button. 

•  To cancel the time delay once it has 

been set, press the Delay button once. 

The   symbol will no longer flash on 

the electronic display. 

•  In order to add/remove laundry while 

delay timer function is working, you 

must press Start/Pause button. After 

adding/removing laundry, you must 

press Start/Pause button again to 

activate delay timer function.

6.  Start/Pause button

Start-Pause

To start the selected programme, press the 

Start button. 

If you switch your machine to standby 

mode, the Start/Pause indicator on the 

electronic display will blink. 

7. 

Child Lock

The Child Lock function allows you to lock 

the buttons so that the wash cycle you have 

chosen cannot be changed unintentionally.

To activate child lock, press and hold 

button 3 and 4 simultaneously for at least 

3 seconds. ‘’CL’’ will flash on the electronic 

display for 2 seconds when the child lock is 

activated.

If any button is pressed or selected 

programme is changed by the programme 

dial while the child lock is active, the “CL” 

symbol will flash on the electronic display 

for 2 seconds.

If the child lock function is active and 

a programme is running, when the 

programme dial is turned to the CANCEL 

position and another programme is selected 

the previously selected programme 

continues from where it was left. 

To deactivate the child lock, press and hold 

button 3 and 4 simultaneously for at least 

3 seconds until the “CL” symbol on the 

electronic display disappears.

7.2. 

Cancelling Programme

To cancel a running programme at any 

time:

1. 

Turn the programme dial to the 

“CANCEL” position.

2. 

Your machine will stop the washing 

operation and the programme will be 

cancelled.

3. 

Turn the programme dial to any other 

programme to drain the machine.

4. 

Your machine will perform the 

necessary draining operation and 

cancel the programme.

You can now select and run a new 

programme.

Summary of Contents for WD13TX





































Reviews: