4
hp20
SAFETY INSTRUCTIONS
:
1. Never place the hair dryer under water. Keep the appliance dry. In case the appliance
drops in the water by accident, unplug it immediately. Do not use it before it is tested by
a qualified electrician
2. If you are using this appliance in the bathroom, always unplug it from the electric outlet
when not in use. Do not use the appliance near bathtubs filled with water, basins or other
vessels.
3. Ensure that the local supply corresponds with the rated voltage of the appliance
4. Children are not allowed to use this hair dryer without adult supervision
5. The supply cord cannot be replaced. If the supply cord is damaged; it must be replaced
by the manufacturer or its service agent or similarly qualified persons in order to avoid a
hazard.
6. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities or lack of experience and knowledge unless they
have been given supervision or instructions concerning the use of the appliance by a
person responsible for their safety; Children should be supervised to ensure that they do
not play with the appliance.
OPERATION INSTRUCTIONS:
1. Set the switch to the position “o”
2. Ensure that the local supply corresponds with the rated voltage of the product before
plugging it into electric outlet. Set the airflow by adjusting the air-switch to your needs.
3. Never leave the hair dryer unattended while it is switched on.
4. Always slide the switch to the position “o” and unplug the appliance after use.
5. Check the cord regularly. Do not use the appliance if the cord or the plug has been dam-
aged. Keep the cord away from any hot surface or from the warm-air outlet of the appli-
ance.
6. Do not insert any object or metal in the hair dryer to avoid damage or electric shock.
7. Do not cover or stuff the inlet or outlet vents of the appliance
8. The hair dryer is protected by a safety cut out. It will cut off the power automatically if the
appliance gets too hot. In this case, slide the switch to the position “o”, unplug the appli-
ance and allow cooling to ambient temperature.
ENG
