Note to user:
Before igniting the unit for the first time, follow through steps 1 to 6 in the below "Ignition" section. Mix a solution of
liquid soap and water in a spray bottle, and apply it to the gas fittings you have just connected. If parts of the fitting
begin to produce bubbles, spray liquid, or if you smell liquid propane gas, immediately close the valve on the
cylinder, and leave the unit for at least an hour undisturbed to allow excess gas to escape. After an hour,
disconnect the hose and take the unit to a certified propane technician for consultation.
Section 2: Manual Ignition (Model: FP19MB/FP19ML Item: KLD4004)
1. Ensure that the valve dial of the unit is on the "off" position by pushing and turning clockwise until the dial stops
(Fig.3).
2. Securely attach regulator (large end of hose) to your propane cylinder (Fig.4).
3. Extend hose to full length and ensure that the propane cylinder is as far as possible safely from the fire pit.
4. Slowly* turn cylinder valve to "open" position.
*Opening the valve too quickly may activate the excess-flow valve in your propane cylinder, which decreasing
gas flow dramatically. In this case, shut valve off and re-open it very slowly.
Fig.1
Fig.2
Fig.3
Fig.4
6
www.camplux.com
Visit Us: Camplux.com
3330-A Marathon Ct Charleston, SC 29418
1(844) 538-7475
