8) The leak can be stopped by tightening any hose connection or
replacing any faulty component. The barbecue must not be used
until the leak is stopped.
9) Close the valve on the gas cylinder. Check for leaks at least
once per year and each time the gas cylinder is replaced.
g) Prior to use
Never use the barbecue until the instructions have been read
carefully and understood. Also, make certain that:
- there are no leaks
- the venturi tubes are not blocked
- the hose does not touch any components which may get hot.
Check that the venturi tubes (VT)
cover the injectors (IJ).
h) Lighting the grill burner
✱
If your apparatus has 2 control knobs
Read steps 1 to 7 before beginning with step 1.
1)
Never light the barbecue with the lid closed, only with
the lid open.
2) Make sure the 2 control knobs are in the "off" (
l
) position.
3) Push the end of the hose completely onto the regulator
nozzle and secure with a suitable clip. Fit the regulator onto the
gas cylinder in accordance with its instructions.
4) Open the gas cylinder valve.
5) Press one of the 2 control knobs and turn it to the
full flame
( ) position, then immediately press the igniter button (
) until
you hear the click. Repeat 3 or 4 times if necessary until the
burner is lit.
6) If the burner fails to light, turn the control knob to the "off"
position (
l
). Wait 5 minutes before repeating the operation.
7) As soon as the burner is lit, the other burner automatically
lights when the second control knob is placed in the
full flame
( ) position without pushing the automatic igniter button again.
Important :
If the burner fails to light after the 2nd attempt, turn the control
knob to the "off" position (
l
) and check that the burner oulets
and venturi tubes are not blocked.
✱
If your apparatus has only 1 control knob
Read steps 1 to 5 before beginning with step 1.
1) Make sure the control knob is in the "off" (
●
) position.
2) Push the end of the hose completely onto the regulator
nozzle and secure with a suitable clip. Fit the regulator onto the
gas cylinder in accordance with its instructions.
3) Open the gas cylinder valve.
4) Press the control knob and turn it to the
full flame
( ) position,
then immediately press the igniter button ( ) until you hear the
click. Repeat 3 or 4 times if necessary until the burner is lit.
5) If the burner fails to light, turn the control knob to the "off"
position (
●
). Wait 5 minutes before repeating the operation.
Important :
If the burner fails to light after the 2nd attempt, turn the control
knob to the "off" position (
●
) and check that the burner outlets
and the venturi tube are not blocked.
i) Grill burner-manual lighting
If the automatic ignition should fail to operate, turn the control
knob to the "off" position (
l
) and wait 5 minutes. Insert a
burning match into one of the side openings of the base, and turn
the knob on the right of the control panel onto the
full flame
( ) position.
j) Turning off the grill burner
Return the control knobs to the "off" position (
l
), then close the
cylinder valve.
k) Lighting the side stove
(if applicable to your model)
The stove may operate independently or in conjunction with the
grill burner.
Lighting
: open the gas cylinder valve.
Check that there is no gas leak between the gas cylinder and the
stove.
Check the condition of the hose connecting the grill burner to
the stove. Should it present cracks, call our After Sales Service to
have it replaced.
Open the valve of the stove (towards the +) and press the igniter
button (
) until you hear the click. Repeat three or four times
if necessary. Should the stove fail to light, present a match to the
edge of the burner.
Adjust the size of the flame to the dimensions of the container
you are using by opening the valve to various extents. Do not use
a container smaller than 10 cm or larger than 26 cm.
l) Turning off the side stove
(if applicable to your
model)
Close the stove valve (towards the -) and the valve of the gas
cylinder if the grill burner is not in use.
m) Replacing the gas cylinder
- Always work in a well ventilated area and never in the
presence of a flame, spark or heat source.
- Return the control knobs in the "off" position (
l
) then close
the cylinder valve.
- Remove the regulator, check that the sealing joint is in good
condition.
- Put the full cylinder in place, refit the regulator, taking care not
to apply stress to the hose.
Check for gas leaks
.
n) Operation
✱
If your apparatus has a lid
- It's recommended that protective gloves be worn to handle
components which may be very hot.
- Before cooking, preheat the barbecue for about 10 minutes
in the
full flame
( ) position with the lid closed.
When using the barbecue for the first time, preheat for about
20 minutes in the
full flame
( ) position, in order to
eliminate the smell of paint from new components.
Cooking rate can be adjusted, depending upon the position of
the control knobs. Temperature with lid closed: in the
full
flame
( ) position, approx. 340 ºC, in the
reduced flame
position ( ) approx. 175 ºC, with the possibility of adjusting the
rate between these 2 positions.
- Depending on how much food is to be cooked, it is possible
to use only half of the grid, by lighting only one side of the burner.
- After cooking, close the lid and put the barbecue in the
full
flame
( ) position for about 10 minutes, in order to burn the
food residue or grease on the grid or on the lava rock (self
cleaning effect).
-
A yellow flame when cooking is normal.
Important
:
If a burner flame goes out when the unit is in use, immediately
turn the control knobs to the "off" (
l
) position, open the lid and
wait 5 minutes to allow the unburnt gas to dissipate. Only
attempt to light again after this time period has elapsed.
✱
If your apparatus has no lid
- It's recommended that protective gloves be worn to handle
components which may be very hot.
- Before cooking, preheat the barbecue for about 20 minutes
in the
full flame
( ) position.
-
A yellow flame when cooking is normal.
Important
:
If a burner flame goes out when the unit is in use, immediately
turn the control knobs to the "off" (
●
) position. Only attempt to
light again after this time period has elapsed.
7
GB
GB
Gb.qxp 08/06/2004 08:50 Page 2
Summary of Contents for Eldorado 2 Super
Page 1: ...N 072181...
