28
GB
GAS LEAK TESTING
●
Gas leak testing must be performed outdoors in a well ventilated area every time cylinder is connected
to stove.
●
Always keep unit away from open flames, sparks or lit cigarettes.
●
Never use a flame to check for gas leaks.
WARNING
Stove Fitting
Gas Hose
Regulator
Watch for Bubbles
Step 1
Assemble stove per “Assembly Instructions”
on page 4 of this manual. Make sure burner
control knobs are in “OFF” position.
Step 2
Prepare a soapy water solution (one part
dishwashing liquid to three parts water) to
test for gas leaks in the connections. Apply
a generous amount of the soapy mixture to
the regulator assembly at the regulator, along
entire length of hose, and at the stove fitting
(located on the right side of stove).
Step 3
With the burner control knobs in the ”OFF”
position, check for the bubbles where gas
cylinder attaches to regulator assembly, along
entire length of hose, and at stove fitting.
If soapy mixtures starts bubbling, gas is
leaking through the connections. Disconnect
the gas cylinder.
Retighten the connection that is leaking gas.
Repeat procedure with soapy mixture until gas
no longer leaks. NEVER USE A FLAME TO
CHECK FOR GAS LEAKS.
Step 4
Once all gas leaks have been sealed, WAIT
AT LEAST 5 MINUTES FOR GAS FUMES
TO DISSIPATE BEFORE LIGHTING THE
BURNERS.
Carefully follow “
Operating Instructions”
to
light the burner and properly operate this unit.
Notched Support Arm
Cooking Grill
Burner Control Knobs
WARNING:
Always snap down the lid arms
on the bottom case to prevent the
stove from becoming unstable
while in use.
EN
IS
FOR
R
EFERENCE
.
DO
N
OT
