9
Network Setting
Basic Information
The initial IP address of a CamPilot MRH310 is 192.168.1.2, which is an IP address of
192.168.1.xxx (1~255) assigned to the private network. If a monitoring PC doesn’t have an IP
address of the same network (192.168.1.1~255), the user have to change the IP address of the
CamPilot MRH310 (Refer to ENCP at p.7)
Check the IP address of a monitoring PC (network information)
1. Get to a command prompt. (START / run / cmd).
2. Type “ipconfig” on the command prompt window and press “Enter”.
Determine the IP address for a CamPilot MRH310 after checking the PC information as table.
REF
xxx : the number should not be used for another PC of a same network
The subnet mask and default gateway of a PC on a same network is same to those of a
CamPilor MRH310.
Checking the unused IP address
Type “
ping
xxx.xxx.xxx.xxx” on the command prompt window and press “Enter”.
If the message “Destination Host Unreachable” shows up, we can know that the IP address is
not used. But it is recommended that you should ask the address to the network administrator
for the PC of the IP address is off.
In case that a public IP address is used for the network, you have to ask the extra IP address to
the network administrator.
PC information example
CamPilot MRH310 address example
Private
Network
Ex.1
IPv4 address
192.168.10.100
Subnet mask
255.255.255.0
Default Gateway
192.168.10.1
IP address
192.168.10.xxx
Subnet mask
255.255.255.0
Default Gateway
192.168.10.1
Private
Network
Ex.2
IPv4 address
10.0.0.10
Subnet mask
255.255.0.0
Default Gateway
10.0.0.4
IP address
10.0.xxx.xxx
Subnet mask
255.255.0.0
Default Gateway
10.0.0.4
Public
Network
Ex.
IPv4 address
123.150.24.34
Subnet mask
255.255.255.0
Default Gateway
123.150.24.1
IP address
123.150.24.xxx
Subnet mask
255.255.255.0
Default Gateway
123.150.24.1
10
Network Setting
Port forwarding
- Setting the router, in case that one (or more) CamPilot MRH310 is connected.
- The port forwarding should be set for the connection from a public network area.
If a CamPilot MRH310 is installed on a private network, the port forwarding should be set for
the connection from a public network area.
As the port forwarding is a setting item of a router, a PC of the IP address on a public network
can be connected to a CamPilot MRH310 on a private network via the router.
If the port forwarding is set up as below, the function works.
REF
Basically the ports 80 and 1852 were used for the web and video connection for a
CamPilot MRH310.
After executing a web browser and typing the IP address that is assigned to the router, you
can monitor the video of CamPilot MRH310 on a PC on a public network.
REF
If you want to use a specific name instead of the IP address of the router, you can use the
DDNS function of a router or a CamPilot MRH310. DDNS function includes updating an IP
address for a specific name though the IP address of the router is changed. (Refer to The
function of updating dynamic IP address at p.11)
11
Network Setting
Port forwarding in case of installing two (or more) CamPilot
MRH310
A port of a router cannot be used for the two (or more) CamPilot MRH310. In this case, another
port number should be added on the router.
Port forwarding example
(NVS: Network Video Server)
Port forwarding of Router
NVS port account
Service
Name
Private IP
Protocol
Service Port
(External Port)
Internal Port
NVS #1-1
192.168.1.100
TCP
8080
8080
8080 - Web
NVS #1-2
192.168.1.100
TCP
2000
2000
2000 – Video + Audio
NVS #2-1
192.168.1.101
TCP
8081
8081
8081 - Web
NVS #2-2
192.168.1.101
TCP
2001
2001
2001 – Video + Audio
NVS #3-1
192.168.1.102
TCP
8082
8082
8082 - Web
NVS #3-2
192.168.1.102
TCP
2002
2002
2002 – Video + Audio
NVS #4-1
192.168.1.103
TCP
8083
8083
8083 - Web
NVS #4-2
192.168.1.103
TCP
2003
2003
2003 – Video + Audio
참고
Though the internal ports of CamPilots are used as default in theory, it is recommended
that the service port of the router and the internal port of CamPilot should be same for the
function doesn’t work by the features of a router.
12
Network Setting
The function of updating dynamic IP address (DDNS)
1. The function DDNS of CamPilot can be used with the environment of one CamPilot MRH310
and an internet modem.
2. The function DDNS of a router should be recommended in case that there is a router for two
(or more) CamPilot MRH310 or the management (firewall) purpose.
