![background image](http://html2.mh-extra.com/html/campgo/raiju/raiju_user-manual_3055753006.webp)
6
Cooking and Heating Food
•
The equipment must be placed on a level surface.
•
After lighting, a pan/pot (max. diameter 20 cm) can be placed on the grate.
•
The appliance should always remain clean, do not overfill the pot! (risk of fire
extinguishing and clogging the burner of the appliance).
Maintenance
Always maintain the equipment at regular intervals and in cases of heavy soiling. Allow
the equipment to cool down. After disconnecting the cartridge, make sure that the valve
is not contaminated and check the seals. The valve should also be checked regularly and
protected from dirt. The piezo ignition coil can be cleaned with a metal brush. The
outside and the cartridge compartment cover can be washed with a damp cloth. Always
allow the device to dry thoroughly after washing.
Troubleshooting
The gas cartridge cannot be connected.
If the cartridge is too hot and cannot be connected to the device due to high pressure,
cool it down and then try to connect it again. Check and, if necessary, clean the
connection valve with a dry cloth.
The burner cannot be lit.
Check the cartridge fill level (no movement of the cartridge contents when shaken after
removal). Attention, as the cartridge temperature decreases and the amount of gas
decreases, the pressure decreases, and the performance of the device decreases
proportionally.
If the burner nozzles are clogged (and cannot be cleaned) or if the valve (ignition)
malfunctions, contact a professional service. If the piezo igniter electrode is clogged or
wet, clean it and allow it to dry.
If the piezo igniter electrode is bent, push it back to the burner.