5
Connecting a Normal Gas Cylinder
•
Open the cover for the gas cartridge.
•
Make sure the control valve is closed (close by turning fully to the right).
•
Connect the included adapter by screwing it onto the cartridge connection valve.
•
Pull the hose (not included) through the hole, attach it to the adapter and secure
it with the clip (not included).
•
The hose must be fitted with a regulating valve (not included). Make sure that the
gas container is fitted with a valve to close the gas supply, or it must be fitted with
a pressure relief valve (not included).
•
Connect the other end of the hose/regulating valve to the gas container.
•
Make sure all parts are connected correctly.
•
It is now advisable to perform a leak test using soapy water.
Igniting and Extinguishing the Device
•
Turn the control valve to the left to release the throttle, in the extreme position
the throttle will ignite (click).
•
The burning intensity can be adjusted by closing (right) or opening (left) the valve
using the control knob. The burner is extinguished by closing the valve
completely using the control knob (turn it to the right to the stop). Do not
manipulate the appliance while the gas is burning.
•
When switching off, always make sure that the flame is really out!
Disconnecting and Replacing the Cartridge
•
Close the valve with the control knob and let the device cool down.
•
The cartridge is enabled by means of the lever, next to the controller, in the
UNLOCK position.
•
Remove the cartridge and replace with a new one if necessary, according to the
instructions “Connecting the gas cartridge“.
•
The gas cartridge must only be replaced outdoors, away from any source of
ignition/ignition and out of reach of other persons.