Campbell TGT1, Operator'S Manual

Page: 27 / 64

TGT1 GOES Transmitter
17
;Sends data to TGT1 every day.
16: If time is (P92)
1: 5 Minutes (Seconds --) into a
2: 1440 Interval (same units as above)
3: 30 Then Do
17: Data Transfer to GOES (P120)
1: 00 Buffer Selection
2: 4 FWD/Ref Power Loc [ FwdPwr ]
18: End (P95)
Fire Weather-Data Transfer to the TGT1
Use instruction 124 in the place of instruction 120 to send data to the TGT1
using the RAWS Fire Weather format. Data in the RAWS Fire Weather format
can be directly loaded into WIMMS. P124 is better at clearing the random
buffer to turn off random transmission.
1: Fire Weather-Data Transfer to TGT1 (P124)
1: 00 Fire Weather Format
2: 00 Buffer Control
3: 0000 FWD/Ref Power Loc [ __________ ]
Fire Weather Format
0 RAWS 7 output
1 xxx.x ASCII output
2 xx.xx ASCII output
3 x.xxx ASCII output
4 xxx ASCII output
5 xxxxx ASCII output
Options 1 through 5
The ASCII output is formatted as a fixed number of digits, with a fixed decimal
place. For options 1 through 4, the data must be in low resolution. Option 5
can be either high or low resolution.
Option 0
The RAWS 7 (Remote Automated Weather Station, seven data values) format
expects data to be stored in one, two, or three arrays, with seven data points in
each array. Other output will cause this instruction to behave unpredictably.
The data must be in low resolution.