Campbell TGT1, Operator'S Manual

Page: 26 / 64

TGT1 GOES Transmitter
16
;Output hourly the average reference Temp, TC Temp, and battery voltage.
06: Average (P71)
1: 3 Reps
2: 1 Loc [ RefTemp ]
;Sample the forward and reflected power.
07: Sample (P70)
1: 2 Reps
2: 4 Loc [ FwdPwr ]
;Transfer data to TGT1 every hour.
08: If time is (P92)
1: 0 Minutes (Seconds --) into a
2: 60 Interval (same units as above)
3: 30 Then Do
;Transfer datalogger's final storage data to the TGT1, read the transmitter's latest forward and
reflected power readings, and place the results in two sequential input locations.
09: Data Transfer to GOES (P120)
1: 00 Buffer Selection
2: 4 FWD/Ref Power Loc [ FwdPwr ]
10: End (P95)
;Set Output Flag High (10) for daily output.
11: If time is (P92)
1: 0 Minutes (Seconds --) into a
2: 1440 Interval (same units as above)
3: 10 Set Output Flag High
;Timestamp data
12: Real Time (P77)
1: 220 Day,Hour/Minute (prev day at midnight, 2400 at midnight)
;Average, maximize, and minimize the reference and thermocouple temperatures, the battery voltage,
and the forward and reflected power readings.
13: Average (P71)
1: 5 Reps
2: 1 Loc [ RefTemp ]
14: Maximize (P73)
1: 5 Reps
2: 0 Value Only
3: 1 Loc [ RefTemp ]
15: Minimize (P74)
1: 5 Reps
2: 0 Value Only
3: 1 Loc [ RefTemp ]