SR50AT-Series Sonic Ranging Sensors
3
3. Under the
Available Sensors and Devices
list, select the
Sensors
|
Miscellaneous Sensors
folder. Select
SR50AT Sonic Ranging Sensor
(SDI-12 Output)
. Click
to move the selection to the
Selected
device
window. Data defaults to meters, which can be changed by clicking the
Unit of measure
box and selecting
cm
,
ft
, or
in
. Enter the
Distance to
base
, which is the distance from the SR50AT’s wire mesh face to the
ground.
SDI-12 Address
defaults to 0. Enter the correct
SDI-12 Address
for the SR50AT if it has been changed from the factory-set default value.
4. After selecting the sensors, click
Wiring Diagram
to see how the sensor is
to be wired to the datalogger. The wiring diagram can be printed now or
after more sensors are added.
