A-1
Appendix A. Solar Panel Connector
The SP10 and SP20 solar panels are shipped with the two lead wires stripped
and tinned. Item #788 connector must be attached to use an SP10 or SP20
with the 21XL.
With the connector, the cable can be inserted directly into the 21XL Charging
Port on the side of the Micrologger.
If it is necessary to solder the connector on the cable, please refer to the
diagram below.
FIGURE A-1. Connector Wiring
Summary of Contents for SP10
Page 4: ...This is a blank page...
Page 12: ...This is a blank page...
Page 13: ...This is a blank page...
