Campbell Sierra Wireless RavenXTV, Instruction Manual

Page: 25 / 50

RavenXTV CDMA Sierra Wireless Cellular Modem
17
5. For PakBus dataloggers, set the PakBus Address on the datalogger page
to match that of the datalogger (default address in the datalogger is 1).
6. Click Apply to save the changes.
6.1 Test the Cellular Connection
After the Network Map has been configured, test the cellular connection using
the Connect screen as shown below. Click on the appropriate station, then click
Connect
to initiate a call to the datalogger. If the call is successful, the
connectors at the bottom of the screen will come together, and time
information from the datalogger will be displayed in the Station Date/Time
field. If the connection fails, a Communications Failure message is displayed.
Troubleshooting procedures can be found in Section 7 , Troubleshooting
(p. 18)
,
and Appendix D , Troubleshooting Flowchart
(p. D-1)
.