Campbell Sierra Wireless RavenXTV, Instruction Manual

Page: 45 / 50

E-1
Appendix E. Reprovisioning a Modem
If the modem has previously been activated on another account, you will need
to do the following to provision the modem on a new account:
1. Connect an antenna and power to the modem.
2. Connect the PC RS-232 port to the modem RS-232 port.
3. Using a terminal program (for example, DevConfig with Device Type
set to Unknown ), issue the following command substituting
XXXXXXXXXX with your modem’s new phone number and press
Enter .
AT*provision=000000,XXXXXXXXXX
The modem will enter OTASP provisioning and, after about 2 minutes, will
respond with a Success message if the provisioning was successful. The
modem will then reboot.