SC105 CS I/O to RS-232 Interface
enclosures models ENC10/12, ENC12/14, or ENC16/18). Spark gap
wiring is straight through such that pin to pin continuity exists between
the two modems. If the modems are installed entirely within a building,
the transient spark gap protection is probably not needed.
FIGURE 5-2. Installation of Spark Gap Protection
Occasionally, a customer needs to transmit data across longer or smaller gage
wires or at higher speeds than can be done with the RAD modem powered by
the SC105. RAD does sell a 9-volt power supply that will boost the signals
enough to meet some of these more demanding applications. Please contact
RAD for more information.
7
