Campbell RF401A Series, Instruction Manual

Page: 38 / 52

RF401A-Series Spread Spectrum Radio
26
11.3.8 RS-232 Stop Bits
Specifies the number of stop bits used on the RS-232 port.
11.3.9 RS-232 Character Length
Specifies the length in bits of character frames on the RS-232 port.
11.3.10 RS-232 Auto Power Down
Specifies whether to always power the RS-232 device or that the RS-232 TX
automatically powers down when there is no activity for 30 seconds.
11.3.11 AT Sequence Character
Specifies the character that should be sent three times sequentially in order to
put the modem in “local” mode.
11.3.12 Silence Time Before Command Sequence
Specifies the amount of time (in tenths of seconds) that the RS-232 interface
must be silent after accepting the AT command sequence before the RF401A
series will enter command mode.
11.3.13 Silence Time After Command Sequence
Specifies the amount of time (in tenths of seconds) that the RS-232 interface
must be silent after accepting the AT command sequence before the RF401A
series will enter command mode.
11.3.14 AT Command Mode Timeout
Specifies the amount of time (in tenths of seconds) that must elapse with no
activity on the RS-232 interface before the RF401A series exits command
mode automatically.
11.3.15 Net Address Mask
Specifies the network portion of the address mask.
11.3.16 Radio Address Mask
Specifies the radio address portion of the address mask.
12. Attributions
PakBus is a registered trademark of Campbell Scientific, Inc.
PolyPhaser is a registered trademark of Transtector Systems, Inc.
Windows is a registered trademark of Microsoft.