PConnectCE for the Allegro CE
4
4. Synchronize with the Allegro. This will unload the ActiveSync provider
for PConnectCE.
This step is crucial. If it is not followed, the software will not
install properly on the Allegro device.
5. Install the PConnectCE 1.1 upgrade on your computer. The installation
will ask if you want to upgrade the application; select
Yes
.
6. Open
Tools | Options
again from the ActiveSync menu. Re-enable the
PConnectCE conduit by selecting the check box beside the text
PConnectCE
and close the dialog by selecting
OK
.
7. Synchronize again with the Allegro; the software installation will be
complete.
3. Connecting Your Allegro CE to the Datalogger
3.1 Direct Serial Connection
The most common method of connecting the Allegro to the datalogger is using
a direct serial connection.
The Allegro CE connects to the datalogger via the serial port on the top of the
Allegro. If you do not have a “Connection Serial Cable” for your Allegro CE,
you will need to purchase one. Since this cable is specific to the Allegro CE it
is not included with the
PConnectCE
software, but can be purchased separately
from your Allegro CE seller.
After connecting the “Connection Cable” to the top of the Allegro CE, use the
supplied “PDA to CS I/O” adaptor to connect to the datalogger:
NOTE
