Campbell OXYGUARD TYPE III CS512 Instruction Manual Download Page 2

Warranty and Assistance 

The

 

CS512 OXYGUARD TYPE III DISSOLVED OXYGEN PROBE 

is 

warranted by CAMPBELL SCIENTIFIC, INC. to be free from defects in 
materials and workmanship under normal use and service for twelve (12) 
months from date of shipment unless specified otherwise.  Batteries have no 
warranty.  CAMPBELL SCIENTIFIC, INC.'s obligation under this warranty is 
limited to repairing or replacing (at CAMPBELL SCIENTIFIC, INC.'s option) 
defective products.  The customer shall assume all costs of removing, 
reinstalling, and shipping defective products to CAMPBELL SCIENTIFIC, 
INC.  CAMPBELL SCIENTIFIC, INC. will return such products by surface 
carrier prepaid.  This warranty shall not apply to any CAMPBELL 
SCIENTIFIC, INC. products which have been subjected to modification, 
misuse, neglect, accidents of nature, or shipping damage.  This warranty is in 
lieu of all other warranties, expressed or implied, including warranties of 
merchantability or fitness for a particular purpose.  CAMPBELL SCIENTIFIC, 
INC. is not liable for special, indirect, incidental, or consequential damages. 

Products may not be returned without prior authorization.  The following 
contact information is for US and International customers residing in countries 
served by Campbell Scientific, Inc. directly.  Affiliate companies handle 
repairs for customers within their territories.  Please visit 
www.campbellsci.com to determine which Campbell Scientific company 
serves your country.  To obtain a Returned Materials Authorization (RMA), 
contact CAMPBELL SCIENTIFIC, INC., phone (435) 753-2342.  After an 
applications engineer determines the nature of the problem, an RMA number 
will be issued.  Please write this number clearly on the outside of the shipping 
container.  CAMPBELL SCIENTIFIC's shipping address is: 

 

 

CAMPBELL SCIENTIFIC, INC. 

 RMA#_____ 
 

815 West 1800 North 

 

Logan, Utah 84321-1784 

 

CAMPBELL SCIENTIFIC, INC. does not accept collect calls. 

 

 

 

Summary of Contents for OXYGUARD TYPE III CS512

















Reviews: