Campbell LS300G, Instruction Manual

Page: 15 / 56

LS300G GSM/GPRS/EDGE/HSPA+ Sierra Wireless Cellular Modem
7
5. For PakBus® dataloggers, set the PakBus Address to match that of the
datalogger (default address in the datalogger is 1). Click Apply to save
the changes.
4.5 Set Up Hardware
The simplest hardware setup for modern dataloggers is to connect a null
modem cable (CSI pn 18663) between the RS-232 ports of the datalogger and
the LS300G. See Section 7.3 , Wiring and Connections
(p. 13)
.
4.6 Test the Connection
After the Network Map has been configured, test the cellular connection using
the Connect screen as shown below. Click on the appropriate station and click
Connect to initiate a call to the datalogger. If the call is successful, the
connectors at the bottom of the screen will come together and clock
information from the datalogger will be displayed in the Station Date/Time
field. If the connection fails, a Communications Failure message will be
displayed. Troubleshooting procedures can be found in Section 9 ,
Troubleshooting
(p. 22)
.