Campbell LS300G, Instruction Manual

Page: 47 / 56

E-1
Appendix E. LS300G Settings
All of the LS300G settings available from the Settings Editor in
DevConfig
are
described below.
E.1 Modem Status Tab
Model (read only)
Specifies the model for this phone modem.
Modems Phone Number (read only)
Shows the modems phone number associated with the account.
ALEOS® SW/HW Version (read only)
Specifies the hardware and software versions of ALEOS® on the modem.
Network State (read only)
Specifies the current state of the cellular radio network connection.
Network Ready Connected to a mobile broadband network and
ready to transfer data.
Connecting To
Network
Establishing a network connection; wait until the
connection is established.
No SIM or
Unexpected SIM
Status
Unable to read the SIM information; check that the
SIM card is installed correctly.
Network
Authentication Failed
Unable to connect to the network because of
invalid authentication data. If the problem persists,
contact your Mobile Network Operator.
Receive Signal Strength Indicator (RSSI) (read only)
Specifies the modems current receive signal strength.
RSSI Signal Strength
> –70 dBm Excellent
–70 dBm to –85 dBm Good
–86 dBm to –100 dBm Fair
< –100 dBm Poor
–110 dBm No Signal