![background image](http://html1.mh-extra.com/html/campbell/ec150/ec150_instruction-manual_489235060.webp)
Appendix A. EC150 Settings
A-9
A.4
Device Configuration Utility
The
Device Configuration Utility
software may also be used to change settings,
although
ECMon
is generally preferred as the user interface is more intuitive.
Device Configuration Utility
may be downloaded at
After launching the
Device Configuration Utility
, select
EC100
from the list
of device types. If this is the first time connecting it to the computer, click
Install USB Driver
before connecting with the USB cable. Then, with the
EC100 connected to the computer, select the correct USB communication port,
and click
Connect
. Once connected, the
Settings
tab displays all current
settings. Click
Apply
to save any changes.
Device Configuration Utility
is also used to send an updated operating system
to the EC100 electronics. The
Send OS
tab gives directions on this procedure,
or you can watch the video tutorial
Updating the EC100 Operating System
A.5 EC100Configure() Instruction
EC100Configure()
is an alternate way to retrieve and modify setting. While
ECMon
and
Device Configuration Utility
software are user-interactive, the
EC100Configure()
instruction allows automated control under
CRBasic
datalogger programming.
EC100Configure()
is a processing task instruction. When running in pipeline
mode, the datalogger will execute the instruction from the processing task. This
functionality allows the instruction to be placed in conditional statements.
Execution from processing also introduces ramifications when attempting to
execute the
EC100Configure()
instruction while other SDM instructions are
executing in pipeline mode. This instruction locks the SDM port during the
duration of its execution. If the pipelined SDM task sequencer needs to run
while the SDM is locked, it will be held off until the instruction completes.
This locking will likely result in skipped scans when reconfiguring an EC150.
For the EC150 to save settings, it must go through a lengthy write-
read-verify process. To avoid saving the settings after each set
command, the resulting code can be used to determine if any
settings were modified from their original value. When a change
is detected, the save settings command (command code
99
) can
then be sent to the EC150. The
DestSource
parameter variable
should be set to
2718
to save the settings. The reception of this
command is acknowledged but since it takes up to a second to
complete, a successful return code does not mean that all of the
data was successfully written to the appropriate non-volatile
memory.
The instruction syntax is:
EC100Configure
(
Result,SDMAddress,ConfigCmd,DestSource
)
Result
is a variable that contains a value indicating the success or failure of the
command. A result code of
0
means that the command was successfully
NOTE
Summary of Contents for EC150
