background image

Warranty and Assistance

The

 

CS500 TEMPERATURE AND RELATIVE HUMIDITY PROBE 

is

warranted by CAMPBELL SCIENTIFIC, INC. to be free from defects in
materials and workmanship under normal use and service for twelve (12)
months from date of shipment unless specified otherwise.  Batteries have no
warranty.  CAMPBELL SCIENTIFIC, INC.'s obligation under this warranty is
limited to repairing or replacing (at CAMPBELL SCIENTIFIC, INC.'s option)
defective products.  The customer shall assume all costs of removing,
reinstalling, and shipping defective products to CAMPBELL SCIENTIFIC,
INC.  CAMPBELL SCIENTIFIC, INC. will return such products by surface
carrier prepaid.  This warranty shall not apply to any CAMPBELL
SCIENTIFIC, INC. products which have been subjected to modification,
misuse, neglect, accidents of nature, or shipping damage.  This warranty is in
lieu of all other warranties, expressed or implied, including warranties of
merchantability or fitness for a particular purpose.  CAMPBELL SCIENTIFIC,
INC. is not liable for special, indirect, incidental, or consequential damages.

Products may not be returned without prior authorization.  The following
contact information is for US and International customers residing in countries
served by Campbell Scientific, Inc. directly.  Affiliate companies handle repairs
for customers within their territories.  Please visit www.campbellsci.com to
determine which Campbell Scientific company serves your country.  To obtain
a Returned Materials Authorization (RMA), contact CAMPBELL
SCIENTIFIC, INC., phone (435) 753-2342.  After an applications engineer
determines the nature of the problem, an RMA number will be issued.  Please
write this number clearly on the outside of the shipping container.
CAMPBELL SCIENTIFIC's shipping address is:

CAMPBELL SCIENTIFIC, INC.

RMA#_____
815 West 1800 North
Logan, Utah 84321-1784

CAMPBELL SCIENTIFIC, INC. does not accept collect calls.

Summary of Contents for CS500



















Reviews: