CS451/CS456 Submersible Pressure Transducer
4
6.
In
Output Setup
, enter the scan rate (1),
Data Output Storage Intervals
(2), and meaningful table names (3).
7.
Select the measurement and its associated output options.
8.
Click
Finish
and save the program. Send the program to the data logger if
the data logger is connected to the computer.
9.
If the sensor is connected to the data logger, check the output of the sensor
in the data display in
LoggerNet
,
PC400
,
RTDAQ
, or
PC200W
to make
sure it is making reasonable measurements.
5. Overview
The CS451/CS456 pressure transducer provides a reliable, accurate
pressure/level measurement that is fully temperature compensated. Its 24-bit
A/D has simultaneous 50/60 Hz rejection and automatic calibration for each
measurement.
A number of additional advanced measurement techniques are employed to
harness the best possible performance available from today’s state-of-the-art
pressure transducer technology. The transducer reverts to a low power sleep
