Campbell CS125, Instruction Manual

Page: 19 / 76

User Guide
9
7.2 Mounting the CS125
A pole mounting kit is supplied with the CS125
If a power supply enclosure has been supplied with the sensor it can be mounted
on the pole, near its base using the brackets supplied with the enclosure.
Alternatively the power supply can be mounted elsewhere, e.g. on a wall at some
distance from the sensor. The power supply enclosure should be mounted away
from the sensor head to avoid wind flow disturbance or rain drops bouncing back
up into the sensor’s sensing volume.
Take care not to overtighten the nuts on the bolts, as it may
be possible to distort and/or damage the brackets or DSP
plate by doing so, and/or the nuts may seize up. Only tighten
the nuts to a degree necessary to hold the CS125 firmly in
place.
Where the CS125 is to be mounted onto another type of mast, please refer to the
manual for that mast for mounting details.
Ensure that the CS125 is mounted according to the figure
below. Do not reposition, once fixings are tightened, by
forcing the arms of the unit as this can cause damage.
Slots are provided to allow band clamps to be used with larger diameter masts.
Figure 7-3. Mounting arrangement
CAUTION
CAUTION