Campbell CR800 Series, Operator'S Manual, Page: 536 / 598

Appendix A. Info Tables and Settings
536
Info Tables and Settings: Obsolete
IPTrace
(p. 542)
PakBusNodes
(p. 546)
ServicesEnabled()
(p. 549)
TCPClientConnections
(p. 551)
TCPPort
(p. 551)
TLSEnabled
Info Tables and Settings: OS and Hardware Versioning
OSDate
(p. 545)
OSSignature
(p. 545)
OSVersion
(p. 545)
RevBoard
(p. 548)
SerialNumber
(p. 549)
Info Tables and Settings: Power Monitors
Battery
(p. 537)
LithiumBattery
(p. 543)
Low12VCount
(p. 543)
Low5VCount
(p. 543)
Info Tables and Settings: Security
PakBusTCPPassword
(p. 546)
Security(1)
(p. 549)
Security(2)
(p. 549)
Security(3)
(p. 549)
TLS Certificate
TLS Private Key
Info Tables and Settings: Signatures
OSSignature
(p. 545)
ProgSignature
(p. 548)
RunSignature
(p. 548)
A.2 Info Tables and Settings Descriptions
The CR800 has several places where system information and settings are stored or
changed:
•
Status table — an automatically created data table. In general, status
fields should not be expected to give an instantaneous update of the value
being read. In most cases the values give a reasonable snapshot of the
status of the system. For most applications, there is a way to get an
instantaneous value directly with a CRBASIC instruction.
•
Settings — the CR800 has over 200 settings. Most of these are best
accessed using Device Configuration Utility , which provides more
information about their use.
•
DataTableInfo table — a data table that is automatically created when a
program produces other data tables
• CPIInfo table — a data table that is automatically created when a
program includes CPI instructions.