Campbell CR800 Series, Operator'S Manual

Page: 549 / 598

Appendix A. Info Tables and Settings
549
RunSignature Numeric Y
•
Station Status field: Run Signature
•
Status table field: 9
Signature of the running binary (compiled) program. Value is independent of comments or
non-functional changes. Often changes with operating-system changes. Updates after
compiling and before running the program.
Info Tables and Settings: S
Keyword Data Type
R
ead
O
nl
y
• Where to Find
Description
SDCInfo
String Y
•
Settings Editor: Advanced | SDC Baudrate
SecsPerRecord() Numeric Y
•
DataTableInfo
table
Reports the data output interval (s) for a data table.
Security(1) Numeric
• Settings Editor: Datalogger | Security Level 1
First level in an array of three security codes. Not shown if security is enabled. 0 disables all
security.
Security(2) Numeric
•
Settings Editor: Datalogger | Security Level 2
Second level in an array of three security codes. Not shown if security is enabled. 0 disables
levels 2 and 3.
Security(3) Numeric
• Settings Editor: Datalogger | Security Level 3
Third level in an array of three security codes. Not shown if security is enabled. 0 disables
level 3.
SerialNumber Numeric Y
•
Settings Editor: Datalogger | Serial Number
•
Status table field: 4
CR800 serial number assigned by the factory. Stored in flash memory. Updated at startup.
Services
Enabled()
Discontinued; replaced by/aliased to HTTPEnabled , PakBusTCPEnabled , PingEnabled ,
TelnetEnabled , TLSEnabled
SkipPakBusRing
SkippedRecord() Numeric Y
• Station Status field: Skipped Records in XXXX
• DataTableInfo table