10.4.75.5 WiFiConfig
Configure the WiFi network. Join, create, or disable network.
l
Long data type, where:
o
0 = Join network
o
1 = Create network
o
4 = Disable network
10.4.75.6 WiFiEAPMethod
The EAP Method must be chosen to match the EAP method being used by the Enterprise Security
network. The inner EAP Methods supported are MSCHAPv2, MSCHAP, CHAP, and PAP.
l
Long data type
10.4.75.7 WiFiEAPPassword
If joining an Enterprise Security-enabled network enter password here.
l
String data type
10.4.75.8 WiFiEAPUser
If joining an Enterprise Security-enabled network enter user name here.
l
String data type
10.4.75.9 Networks
Lists the networks available in the area. Information listed for each network is shown as {SSID,
RSSI / Signal Strength, Channel, Security}. Sometimes areas are covered by multiple access points
configured with the same network name (SSID). In that case multiple unique access points
possessing the same network name (SSID) may be listed here.
l
String data type
l
Read only
10.4.75.10 WiFiEnable
Set to enable or disable the WiFi service. By default, WiFi is enabled. To disable, set the
Configuration option to Disable. 0 Disabled, 1 or <>0 Enabled.
l
Boolean data type
10. Information tables and settings (advanced)
207