l
When opening the package, take care to not damage or cut the cable jacket. If there is any
question about damage having been caused to the cable jacket, a thorough inspection is
prudent.
l
The model number is on the housing. Check this information against the shipping
documentation to ensure that the expected model number was received.
4. QuickStart
A video that describes data logger programming using
Short Cut
is available at:
www.campbellsci.com/videos/cr1000x-data logger-getting-started-program-part-3
.
Short
Cut
is an easy way to program your data logger to measure the sensor and assign data logger
wiring terminals.
Short Cut
is available as a download on
. It is included
in installations of
LoggerNet
,
RTDAQ
, and
PC400
.
The following procedure also shows using
Short Cut
to program the ClariVUE 10.
1. Open
Short Cut
and click Create New Program.
2. Double-click the data logger model.
ClariVUE™10 Side-Scatter Turbidity Sensor
2
